CGS Hawk Arrow I

The Hawk Arrow I is an updated version of the Hawk Classic, incorporating features requested over the years.

Specs Kit Includes Covering Options Engine Packages Additional Options Parachute Options Special Options

Hawk Arrow I - Light Sport Aircraft

The nose section is longer and the angles downward steeper than that of the Hawk Classic. This allows for better forward visibility at low sun angles. Since the nose was made longer, the rudder and vertical stabilizer were enlarged to maintain the same excellent yaw stability of the Hawk classic. The tail boom was reinforced to handle the loades of this larger tail assembly.

The Arrow single seat wing has the same semi-symmetrical airfoil as the Arrow II, and streamlines extruded aluminum wing struts. It also includes the curved overhead and curved windshield giving it excellent flying characteristics.

The Arrow can be completed for under $25,000 with popular options. Pricing will vary depending on engine, instrumentation, and options choices.

Specifications - Hawk Arrow

Empty Weight - 330lbs
Gross Weight - 625 lbs
Wing Span - 28' 10"
Wing Area - 135 sq. ft
Engine Size - 40-65 hp
Rate of Climb - 800-1100 fpm
Cruise Speed - 55-75 mph
Stall Speed - 28-34 mph
Vne - 100 mph
Assembly Time for First time Builder - 200 hours

BASIC KIT INCLUDES AS STANDARD EQUIPMENT:

Airframe with curved windshield, sharper slope of nose for improved visibility
3-Position Wing Flaps (not flaperons)
3-Axis Control
Full fuselage pilot surround (roll cage)
Strengthened tail boom, and streamlined wing struts
Shoulder Harness and seat belt
Larger vertical stabilizer and rudder
Heavy duty wings 2 ¼” dia. leading edge, 1 ¾ “ dia. trailing edge (FACTORY PRE BUILT)
Curved overhead carry through increases head room by 3”
All control surfaces (FACTORY PRE BUILT) (flaps, ailerons, rudder, vertical stab, horizontal stab, & elevator)
Heavy duty fiberglass landing gear legs
Your choice – tail dragger with steerable tail wheel or tricycle/steerable nosewheel
Rough terrain wheels - 16" x 6.5" x 6"
Streamlined Struts - aluminum
Streamlined landing gear fairings
5 gallon fuel tank
Anodized Tubing

Call for Pricing

*All domestic kits shipped via truck line are subject to a crating charge per kit. Orders which are picked up at the factory are not subject to the crating charge

Covering Package & Colors

Includes your choice of either 3.8 oz. stabilized dacron covers or dope and fabric kit. Dacron covers include all control surfaces which are pre-sewn and ready to install, zipper doors, and full fuselage enclosure. Dope and fabric kit includes ribs, stringers, hard doors, fabric, and glue - everything but paint).
‍

**There is no extra charge for ordering Dacron covers with solid colors. You can mix the solid colors as much as you like. (i.e. red wings, yellow ailerons, yellow flaps, black fuselage, etc.). Stripes and special logos are optional, and a layout diagram needs to be submitted for a quote. Color samples and layout diagrams are available upon request.

Engine Packages*- Hawk Arrow

* Engine package prices offered below are for combining with the above kit and covering packages only

** Due to the varying rate of the Euro against the US Dollar, all engine packages will be priced at the time written order is received. Please call or email us for pricing and availability.

Rotax 582 (65 h.p.) Engine Package:

Includes engine, radiator package, IVO three blade prop, electric start, throttle assembly, motor mounts, muffler mounts, miscellaneous hardware and brackets.

HKS 700E 4 Stroke (60 h.p.) Engine Package:

Includes engine, IVO two blade prop, throttle assembly, motor mounts, muffler mounts, miscellaneous hardware and brackets

After Market Only - Rotax 447 (40 h.p.) Engine Package:

Includes engine, electric start, IVO three blade prop, throttle assembly, motor mounts, muffler mounts, miscellaneous hardware, and brackets.

After Market Only - Rotax 503 (50 h.p.) Dual Carb Engine Package: